Cyber_Security_Notes/B. 第二阶段/拓扑练习/0829_ACL规则优先级.md

108 lines
3.5 KiB
Markdown
Raw Normal View History

2024-08-29 17:36:46 +08:00
# ACL规则优先级
![image-20240829171502458](https://picgo-noriu.oss-cn-beijing.aliyuncs.com/Images/image-20240829171502458.png)
![image-20240829170059565](https://picgo-noriu.oss-cn-beijing.aliyuncs.com/Images/image-20240829170059565.png)
### 一、IP
- AR1
```
[AR1]int g0/0/0
[AR1-GigabitEthernet0/0/0]ip add 192.168.3.254 24
[AR1-GigabitEthernet0/0/0]int g0/0/1
[AR1-GigabitEthernet0/0/1]ip add 192.168.1.254 24
[AR1-GigabitEthernet0/0/1]int g0/0/2
[AR1-GigabitEthernet0/0/2]ip add 192.168.2.254 24
```
### 二、ACL
- **AR1**
```
[AR1]acl 2000
[AR1-acl-basic-2000]rule 10 permit source 192.168.1.1 0.0.0.0
[AR1-acl-basic-2000]rule 20 deny source 192.168.1.0 0.0.0.255
[AR1-acl-basic-2000]quit
[AR1]int g0/0/0
[AR1-GigabitEthernet0/0/0]traffic-filter outbound acl 2000
```
***注释:***
1. `[AR1]acl 2000`在设备AR1上创建一个编号为2000的基本ACL。
2. `[AR1-acl-basic-2000]rule 10 permit source 192.168.1.1 0.0.0.0`在ACL 2000中添加规则10该规则允许源IP地址为192.168.1.1的数据包通过。
3. `[AR1-acl-basic-2000]rule 20 deny source 192.168.1.0 0.0.0.255`在ACL 2000中添加规则20该规则拒绝源IP地址在192.168.1.0/24网段的数据包通过。
4. `[AR1-acl-basic-2000]quit`退出ACL 2000的配置模式。
5. `[AR1]int g0/0/0`进入设备AR1的GigabitEthernet0/0/0接口配置模式。
6. `[AR1-GigabitEthernet0/0/0]traffic-filter outbound acl 2000`在GigabitEthernet0/0/0接口的出方向应用ACL 2000以过滤出站流量。
> 需要注意的是ACL规则的执行顺序是从上到下的因此规则10和规则20的顺序很重要。在这个例子中由于规则10先于规则20所以只有源IP地址为192.168.1.1的数据包会被允许通过而192.168.1.0/24网段的其他数据包将被拒绝。然而由于规则20覆盖了规则10中的IP地址实际上所有来自192.168.1.0/24网段的数据包都将被拒绝。这可能是配置错误通常应该先配置拒绝规则然后配置允许规则。
### 三、测试
- **PC间连通性测试**
> 全通
- **PC PING Server**
- PC1
```
PC>ping 192.168.3.1
Ping 192.168.3.1: 32 data bytes, Press Ctrl_C to break
Request timeout!
From 192.168.3.1: bytes=32 seq=2 ttl=254 time=31 ms
From 192.168.3.1: bytes=32 seq=3 ttl=254 time=32 ms
From 192.168.3.1: bytes=32 seq=4 ttl=254 time=31 ms
From 192.168.3.1: bytes=32 seq=5 ttl=254 time=31 ms
--- 192.168.3.1 ping statistics ---
5 packet(s) transmitted
4 packet(s) received
20.00% packet loss
round-trip min/avg/max = 0/31/32 ms
```
- PC2
```
PC>ping 192.168.3.1
Ping 192.168.3.1: 32 data bytes, Press Ctrl_C to break
Request timeout!
Request timeout!
Request timeout!
Request timeout!
Request timeout!
--- 192.168.3.1 ping statistics ---
5 packet(s) transmitted
0 packet(s) received
100.00% packet loss
```
- PC3
```
PC>ping 192.168.3.1
Ping 192.168.3.1: 32 data bytes, Press Ctrl_C to break
From 192.168.3.1: bytes=32 seq=1 ttl=254 time=16 ms
From 192.168.3.1: bytes=32 seq=2 ttl=254 time=15 ms
From 192.168.3.1: bytes=32 seq=3 ttl=254 time=16 ms
From 192.168.3.1: bytes=32 seq=4 ttl=254 time<1 ms
From 192.168.3.1: bytes=32 seq=5 ttl=254 time=16 ms
--- 192.168.3.1 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 0/12/16 ms
```